Cisco 350-401 Quiz 54 Topic 15 Questions 266-270

Question: 1

While configuring an IOS router for HSRP with a virtual IP of 10 1.1.1. an engineer sees this log message.

AChange the HSRP group configuration on the remote router to 1.

BChange the HSRP group configuration on the local router to 1.

CChange the HSRP virtual address on the remote router to 10.1.1.1

DChange the HSRP virtual address on the local router to 10.1.1.1

Show Answer

Question: 2

Router 1 is currently operating as the HSRP primary with a priority of 110 router1 fails and router2 take over the forwarding role. Which command on router1 causes it to take over the forwarding role when it return to service?

Astandby 2 priority

Bstandby 2 preempt

Cstandby 2 track

Dstandby 2 timers

Show Answer

Question: 3

Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?

Asecurity group tag ACL assigned to each port on a switch

Bsecurity group tag number assigned to each port on a network

Csecurity group tag number assigned to each user on a switch

Dsecurity group tag ACL assigned to each router on a network

Show Answer

Question: 4

Refer to the exhibit.

q4_350-401

Company policy restricts VLAN 10 to be allowed only on SW1 and SW2. All other VLANs can be on all three switches. An administrator has noticed that VLAN 10 has propagated to SW3. Which configuration corrects the issue?

A)

q4_350-401

B)

q4_350-401

C)

q4_350-401

D)

q4_350-401

AOption A

BOption B

COption C

DOption D

Show Answer

Question: 5

Refer to the exhibit. An engineer attempts to configure a router on a stick to route packets between Clients, Servers, and Printers; however, initial tests show that this configuration is not working. Which command set resolves this issue?

A)

q5_350-401

B)

q5_350-401

C.

q5_350-401

D.

q5_350-401

AOption A

BOption B

COption C

DOption D

Show Answer

While configuring an IOS router for HSRP with a virtual IP of 10 1.1.1. an engineer sees this log message.

Router 1 is currently operating as the HSRP primary with a priority of 110 router1 fails and router2 take over the forwarding role. Which command on router1 causes it to take over the forwarding role when it return to service?

Question: 3
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?

Refer to the exhibit.
Company policy restricts VLAN 10 to be allowed only on SW1 and SW2. All other VLANs can be on all three switches. An administrator has noticed that VLAN 10 has propagated to SW3. Which configuration corrects the issue?
A)
B)
C)
D)

Refer to the exhibit. An engineer attempts to configure a router on a stick to route packets between Clients, Servers, and Printers; however, initial tests show that this configuration is not working. Which command set resolves this issue?
A)
B)
C.
D.

Cisco 350-401 Quiz:54 Topic:15 Questions:266-270

While configuring an IOS router for HSRP with a virtual IP of 10 1.1.1. an engineer sees this log message.

Router 1 is currently operating as the HSRP primary with a priority of 110 router1 fails and router2 take over the forwarding role. Which command on router1 causes it to take over the forwarding role when it return to service?

Question: 3Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?

Refer to the exhibit.Company policy restricts VLAN 10 to be allowed only on SW1 and SW2. All other VLANs can be on all three switches. An administrator has noticed that VLAN 10 has propagated to SW3. Which configuration corrects the issue?A)B)C)D)

Refer to the exhibit. An engineer attempts to configure a router on a stick to route packets between Clients, Servers, and Printers; however, initial tests show that this configuration is not working. Which command set resolves this issue?A)B)C.D.

Cisco 350-401 Quiz:54 Topic:15 Questions:266-270

Question: 3
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?

Refer to the exhibit.
Company policy restricts VLAN 10 to be allowed only on SW1 and SW2. All other VLANs can be on all three switches. An administrator has noticed that VLAN 10 has propagated to SW3. Which configuration corrects the issue?
A)
B)
C)
D)

Refer to the exhibit. An engineer attempts to configure a router on a stick to route packets between Clients, Servers, and Printers; however, initial tests show that this configuration is not working. Which command set resolves this issue?
A)
B)
C.
D.