Nokia 4A0-C02 Quiz 9 Topic 5 Questions 41-45

Question: 1

An extranet VPRN is configured on Alcatel-Lucent 7750 SRs. On which router(s) should the displayed configuration be applied?

ARouter R1

BRouter R2

CRouters R1 and R2

DRouter R3

ERouter R4

Show Answer

Question: 2

Router R4 is an Alcatel-Lucent 7750 SR configured for the extranet VPRN network. Which CLI command is executed on router R4 to produce the displayed output?

A'show router 10 route-table'

B'show router route-table'

C'show router 20 route-table'

DThere is no CLI command that can produce this output on router R4

Show Answer

Question: 3

Which of the following about the inter-AS model A VPRN configuration on ASBR1 is TRUE?

AThe route-distinguisher value must be 64496:10 for successful VPRN operation.

BAn export policy is not required for successful VPRN operation.

CThe 'family vpn-ipv4' command is required under the BGP configuration for successful VPRN operation.

DThe neighbor address should be 10.10.10.4 under the BGP configuration for successful VPRN operation.

EThe VPRN configuration on ASBR1 is correct.

Show Answer

Question: 4

For the inter-AS model A VPRN. BGP is used as the PE-CE routing protocol. Which of the following statements about the control plane operation is TRUE?

APE1 sends an IPv4 update for prefix 192.168.1.0/27 via MP-BGP to ASBR1.

BASBR1 sends an IPv4 update for prefix 192.168.1.0/27 to ASBR2.

CASBR1 transforms an IPv4 update for prefix 192.168.1.0/27 to a VPN-IPv4 route; allocates VPN label V1 and sends the update to ASBR2.

DASBR2 accepts a VPN-IPv4 update from ASBR1, then sends the update to PE2 via MP-BGP.

Show Answer

Question: 5

For the inter-AS model B VPRN, which of the following protocols is used to advertise routes between PE1 and ASBRI?

AiBGP

BeBGP

CMP-iBGP

DMP-eBGP

Show Answer

Nokia 4A0-C02 Quiz:9 Topic:5 Questions:41-45