Nokia 4A0-C02 Quiz 14 Topic 11 Questions 66-70

Question: 1

Which bridge will become the root bridge?

ABridge B

BBridge C

CBridge D

DBridge E

Show Answer

Question: 2

The service MTU on PE-A is 1514 bytes and the service MTU on PE-C is 1518 bytes. What is the status of the mesh-sdp between PE-A and PE-C?

AThe mesh-sdp will be up.

BThe mesh-sdp will be down.

CThe mesh-sdp will only be up on PE-A.

DThe mesh-sdp will only be up on PE-C.

Show Answer

Question: 3

In the following diagram, traffic ingressing on SAP 1/2/3:1 will be passed to the layer-2 DPI device for inspection based on a filter policy applied to the ingress of the SAP. What feature should be enabled on SAP 1/2/1:100 and SAP 1/2/2:100 to ensure that incorrect information is not populated in the FDB of VPLS 1?

ALearning should be disabled on both SAPs connected to the DPI device to prevent FDB instability

BA MAC filter should be applied to both SAPs connected to the DPI to limit MAC learning on the port

CAn IP filter should be applied to both SAPs connected to the DPI to prevent FDB instability

DThe SAPs connected to the DPI should be configured with the 'discard-unknown' feature to limit MAC learning on the port

Show Answer

Question: 4

Which ports will become root ports? (Choose 3)

ABridge B 1/1/3

BBridge B 1/1/2

CBridge C 1/1/2

DBridge C 2/1/1

EBridge D 1/1/1

FBridge D 1/1/3

GBridge E 1/1/1

HBridge E 1/1/3

Show Answer

Question: 5

You have been requested to add load balancing across the redundant spoke-SDPs in the network shown. What further configuration is required? (Choose 2)

AAn additional management VPLS.

BAnother set of LSPs between PE1 and PE3 and between PE2 and PE4.

CAnother set of SDPs between PE1 and PE3 and between PE2 and PE4.

DLoad balancing has to be enabled within the management VPLS.

Show Answer

Nokia 4A0-C02 Quiz:14 Topic:11 Questions:66-70