Dell EMC DES-5121 Quiz 1 Topic 3 Questions 1-5

Question: 1

Switch-1(config)# interface tengigabitethernet 1/0/1

Switch-1(config)# switchport mode access

Switch-1(config)# switchport trunk allowed vlan 10, 20

Switch-1(config)#

Switch-1(config)# interface tengigabitethernet 1/0/3

Switch-1(config)# switchport mode access

Switch-1(config)# switchport access vlan 10

Switch-2(config)# interface tengigabitethernet 1/0/2

Switch-2(config)# switchport mode trunk

Switch-2(config)# switchport trunk allowed vlan 10, 20

Switch-2(config)#

Switch-2(config)# interface tengigabitethernet 1/0/6

Switch-2(config)# switchport mode access

Switch-2(config)# switchport access vlan 20

q1_DES-5121

A network administrator is troubleshooting why Host 1 cannot communicate with Host 2.

Based on the switch output shown in the exhibit, what is the reason for the communication issue?

APort Te1/0/1 on Switch-1 is configured incorrectly

BPort Te1/0/2 on Switch-2 is configured incorrectly

CPort Te1/0/3 for Host 1 is configured incorrectly on Switch-1

DPort Te1/0/6 for Host 2 is configured incorrectly on Switch-2

Show Answer

Question: 2

To which destination MAC address are MLAG peer-keepalive packets sent?

A01:00:B5:00:00:00

B01:00:C5:00:00:00

CB5:00:01:00:00:00

DC5:00:01:00:00:00

Show Answer

Question: 3

A Dell EMC N-Series switch is configured to uplink to a customer switch using two separate 4-port port- channels configured as trunks. Both switches are configured with 16 VLANs and RSTP.

How will VLAN traffic be distributed across the port-channels?

AAll VLANs are allowed across a single port-channel

BA single VLAN is allowed across each port-channel

CAll VLANs are allowed across both port-channels

DEight VLANs are allowed across each port-channel

Show Answer

Question: 4

A user's host with an IP address of 172.16.1.22/24 is attempting to FTP a file from the server with IP address 10.1.1.99; however, they are unable to connect.

Which access-list is preventing this traffic?

A# ip access-list ACL1
# deny ip any host 10.1.1.99

B# ip access-list ACL2
# permit ip 172.16.1.0 0.0.0.255 any

C# ip access-list ACL3
# deny ip any 172.16.2.0 0.0.0.255

D# ip access-list ACL4
# permit ip host 172.16.1.22 host 10.1.1.99

Show Answer

Question: 5

Which commands should a network administrator use to configure a RADIUS server on a Dell EMC N-Series switch?

ASwitch-1(config)# radius 10.1.1.111
Switch-1(config-radius)# name RADIUS-Server
Switch-1(config-radius)# key secretkey

BSwitch-1(config)# radius server auth 10.1.1.111 Switch-l(config-radius)# name RADIUS-Server Switch-1(config-radius)# key 'secretkey'

CSwitch-1(config)# radius auth 10.1.1.111 Switch-1(config-radius)# name 'RADIUS-Server' Switch-1(config-radius)# key 'secretKey'

DSwitch-1(config)# radius auth server 10.1.1.111 Switch-1(config-radius)# name RADIUS-Server Switch-1(config-radius)# key 'secretKey'

Show Answer

Dell EMC DES-5121 Quiz:1 Topic:3 Questions:1-5