Cisco 300-620 Quiz 2 Topic 5 Questions 6-10

Question: 1

Refer to the exhibit.

q1_300-620

A client reports that the ACI domain connectivity to the fiber channel storage is experiencing a B2B credit oversubscription. The environment has a SYSLOG server for state collection messages. Which value should be chosen to clear the critical fault?

A300

B410

C350

D510

Show Answer

Question: 2

Which method does the Cisco ACI fabric use to load-balance multidestination traffic?

APIM routing

Bspanning trees

Cshortest-path trees

Dforwarding tag trees

Show Answer

Question: 3

A bridge domain for an EPC called ''Web Servers'' must be created in the Cisco APIC. The configuration must meet these requirements:

Only traffic to known Mac addresses must be allowed to reduce noice.

The multicast traffic must be limited to the ports that are participating in multicast routing.

The endpoints within the bridge domain must be kept in the endpoint table for 20 minultes without any updates.

Which set of steps configures the bridge domain that satisfies the requirements?

ASelect the ARP Flooding checkbox.
Create an Endpoint Retention Policy with a Remote Endpoint Aging Interval of 20 minutes.
Set L3 Unknown Multicast Flooding to Optimized Flooding

BSet L2 Unknown Unicast to Hardware Proxy.
Configure L3 Unknown Multicast Flooding to Optimized Flood.
Create an Endpoint Retention Policy with a Local Endpoint Aging interval of 1200 seconds.

CSwitch L2 Unknown Unicast to Flood.
Select the default Endpoint Retention Policy and set the Local Endpoint Aging to 20 minutes.
Set Multicast Destination Flooding to Flood in Encapsulation.

DMulticast Destination Flooding should be set to Flood in BD.
Set L3 Unknown Multicast Flooding to Flood.
Select the default Endpoint Retention Policy with a Local Endpoint Aging Interval of 1200 seconds.

Show Answer

Question: 4

A Cisco APIC is configured with RADIUS authentication as the default The network administrator must ensure that users can access the APIC GUI with a local account if the RADIUS server is unreachable. Which action must be taken to accomplish this goal?

ACreate an additional login domain that references local accounts

BEnable the fallback check with the default authentication domain

CAssociate console authentication with the 'RADIUS' realm.

DReference the local realm in the fallback domain

Show Answer

Question: 5

Refer to the exhibit. The external subnet and internal EPG1 must communicate with each other, and the L3Out traffic must leak into the VRF named "VF1". Which configuration set accomplishes these goals?

AExport Route Control Subnet
Import Route Control Subnet
Aggregate Shared Routes

BExternal Subnets for External EPG
Shared Route Control Subnet
Shared Security Import Subnet

CExternal Subnets for External EPG
Import Route Control Subnet
Shared Route Control Subnet

DExport Route Control Subnet
Shared Security Import Subnet
Aggregate Shared Routes

Show Answer

Cisco 300-620 Quiz:2 Topic:5 Questions:6-10