A10 Networks A10-System-Administration Quiz 1 Topic 1 Questions 1-5

Question: 1

Which statement correctly describes the result of the following commands?

ACOS(config)#logging host 192.168.216.45

ACOs(config)#end

ACOS#active-partition p1

Currently active partition: p1

ACOS[p1](config)#logging host 2.2.2.2

ACOS[p1](config)#logging host partition shared

ASystem logs generated from partition ''p1'' will be sent to logging server ''2.2.2.2'', and only warning severity log messages are sent to the shared logging server's ''192.168.216.45''.

BSystem logs generated from partition ''p1'' will be sent to logging server ''2.2.2.2'', as well as to the shared logging server's ''192.168.216.45''.

CSystem logs generated from partition ''p1'' will be sent to logging server ''2.2.2.2''.

DSystem logs generated from partition ''p1'' will be sent to the shared logging server's ''192.168.216.45''.

Show Answer

Question: 2

When you execute a reboot command on the vMaster, how is aVCS Chassis affected?

AReboot is performed on vMaster and reload operation on vBlades.

BAll devices in the chassis are rebooted.

CReboot is performed on vMaster.

DReboot is performed only on vBlades.

Show Answer

Question: 3

Which statement is true about the requirements for ACOS devices that are part of an aVCS cluster?

AAny Thunder series devices can be clustered together in an aVCS set

BDevices must be the same model but can have different optional hardware cards

CDevices must be the same model and have the same optional hardware cards

Show Answer

Question: 4

In a VRRP-A topology that contains four devices, select the number of devices on which a single VRID can be simultaneously active?

A1

B2

C3

D4

Show Answer

Question: 5

When private partitions are created on a device where VRRP-A is enabled, which statement is true?

ANo VRIDs are configured on a private partition until explicitly configured.

BVRID 0 is configured with settings identical to VRID 0 on the shared partition.

CAll VRIDs on the shared partition are replicated on the private partitions.

DVRID 0 is configured with its default settings.

EVRRP-A is not available on private partitions.

Show Answer

A10 Networks A10-System-Administration Quiz:1 Topic:1 Questions:1-5